Xerox CopyCentre C35 Quick Reference Manual page 76

To use Build Job, split the job into programming and scanning segments. Ensure
Build Job is selected and program and scan the first segment. Continue to program
and load segments until the whole job has been scanned. Select End Build Job
when the entire job has been scanned.
Options:
The feature is switched off.
Off
Use to enable the Build Job feature.
On
Offers options which can be selected when using Build Job.
Build Job
Controls
Build Job Controls options are as follows:
Quick Reference Guide
Select this option after the last segment of the job has been
E B J
ND UILD OB
scanned. The job will be sent to print.
Select to see a proof of the last segment scanned.
S L
AMPLE AST
S
EGMENT
Use to delete the last segment scanned.
D L
ELETE AST
S
EGMENT
Use to stop and cancel the sample segment that is currently
C S
ANCEL AMPLE
printing.
P
RINTING
Use to delete the current job and return to the main Build Job
D A
ELETE LL
screen.
SEGMENTS
Page 4-27