Original Input - Xerox CopyCentre C35 Quick Reference Manual

Original Input

Use this option to program the size of the originals being scanned or enable the
machine to recognize the size of the originals.
Options:
Use this option to allow the machine to recognize the size of the originals being fed
Auto
through the Document Handler.
NOTE: When originals are scanned using the document glass and an Auto feature
such as Auto Paper, Auto% or Auto Centre is selected, the machine will scan the
original twice.
Use this option to specify the dimensions of the document scanning region when
Manual Platen
scanning from the document glass. There are several dimensions that correspond
Input
to common document sizes and orientations.
Select a standard size or use Custom to manually adjust the scanning dimensions.
Use this feature to copy a document containing mixed size originals. The originals
Mixed Size
must be the same width, for example 8.5x11inch long edge feed and 11x17inch
Originals
short edge feed. Load documents in the Document Handler when using this feature.
Quick Reference Guide Page 4-15