Xerox 4112 Pdl Reference Manual page 21

Feature
Duplex @PJL
value1
@PJL
value2
<ESC>&l int S
Orientation @PJL SET ORIENTATION
= value
<ESC>&l int O
Force short @PJL SET
edge feeding PAPERDIRECTION = value
Job Mode @PJL JOB MODE = value
Job Type @PJL SET HOLD = value1
(Secure Print / See Example 3
Proof Print)
@PJL SET HOLDKEY ="
four-digit string"
Interleaving @PJL SET SLIPSHEET =
Paper(Transp value
arency
Separator)
Job Based @PJL SET JOBATTR =
Accounting "@JOAU = string1"
@PJL SET JOBATTR =
"@JOAP = string2"
@PJL SET JOBATTR =
Page 21
Implementation
SET DUPLEX
SET BINDING
= Where value1 is one of the following:
ON: duplex
=
Where value2 is one of the following:
LONGEDGE
SHORTEDGE
(value2 is used combined with value1=ON)
Where int is one of the following:
1: Duplex Long Edge Binding
2: Duplex Short Edge Binding
Where value is one of the following:
PORTRAIT
LANDSCAPE
Where int is one of the following:
0: Portrait
1: Landscape
2: Reverse Portrait
3: Reverse Landscape
Where value is one of the following:
SEF: Short Edge Feed
LEF: Long Edge Feed
Where value is one of the following:
PRINTER
Where value1 is one of the following:
PROOF:
STORE:
print)
The HOLDKEY variable acts as a password
without encryption to protect a held job.
Four-digit string can be any four-digit value
from 0000 to 9999. The default value is "".
When ""(null) is specified, no password is
required.
Where value is one of the following:
OFF: no slipsheet
BLANK: blank slipsheet
COPY: imaged slipsheet
Where string1 is a maximum of 32 character
( ASCII characters in the range 20h - 7Eh are
allowedOnly
) as job owner (Capital character & small
character is distinguished)
Where string2 is a maximum of 12 character
(ASCII characters in the range 20h - 7Eh are
Xerox 4127/4112 PDL Reference Guide
Values
for Printer
proof print
confidential print (secure