Table of Contents
Advertisement
1.2 Packaging List
1.3 Operation conditions and safety instructions
In order to maintain good performance and reliability of this product, please operate the laser
under conditions as below:
(1) This fiber laser shall be operated with 24V/5A DC power supply; wrong connection will
damage the fiber laser, which lead to the laser can't work.
(2) There should be 10-cm-wide air gaps in front and behind the fiber laser chamber, and
the air flow direction should be the same with the direction of the fiber laser system; Short
ventilation distance and wrong air flow direction will lead to the fiber laser can't
work.
(3) The operating temperature should be 0~40℃; the fiber laser will alarm internal if the
temperature above 40℃; it's a protection action, in order to insure the long time operational
reliability.
(4) Please keep the fiber laser source clean during the operation, especially for the fiber
pigtail and output isolator; please remember cover the isolator when the laser is unworking.
Dust on the isolator will cause heating and lens damage, which results in the laser
output power attenuation
(5) Please ensure the power is off before install and uninstall this fiber laser.
(6) Never look at the fiber laser head, and please wear laser goggle when operate this
fiber laser;
File Number: EFLP001-B
Table 2 Packaging List of YDFLP
Items
Fiber Laser source
24V Power supply Cable
db25 male to female
adapter
USB Data Line(GUI)
Specification List
Precautions
Shenzhen JPT Opto -Electronics Co. Ltd.
3
YDFLP-C-20-M7-S-X user manual
Quantity
1
1
1
1
1
1
Version :B Date:2018. 4
Advertisement
Table of Contents
