Gui Operation; Serial Comm Port; Gui Control The Emission - JPT YDFLP-C-20-M7-S-X User Manual

4.3 GUI Operation

4.3.1 Serial Comm Port

After the connect the cable to check the port number: my computer - > properties - >
hardware - > device manager - >
If the serial number of COM is larger than the COM4 than change the COM number
within 4.
Click the Serial Comm Number as follows:

4.3.2 GUI control the emission

(1) Choose the GUI control Mode
If you choose the GUI control, this setting will be saved automatically after the power down, so
please cancel the GUI control mode, if you don't want to use the GUI to control the laser.
File Number: EFLP001-B Shenzhen JPT Opto -Electronics Co. Ltd.
19
YDFLP-C-20-M7-S-X user manual
Version :B Date:2018. 4