Service; Safety Instructions For The Garden Shredder - PrimAster PMWH 3000 Operating Instructions Manual

that cannot be controlled with the switch is
dangerous and must be repaired.
c)Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d)Store idle power tools out of the reach of
children and do not allow persons unfamil-
iar with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalign-
ment or binding of moving parts, breakage
of parts and any other condition that may af-
fect the power tool's operation. If damaged,
have the power tool repaired before use. Many
accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean. Prop-
erly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g) Use the power tool, accessories and tool
bits etc. in accordance with these instruc-
tions, taking into account the working con-
ditions and the work to be performed. Use
of the power tool for operations different from
those intended could result in a hazardous
situation.
h) Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for
safe handling and control of the tool in unex-
pected situations.

2.5 Service

a) Have your power tool serviced by a quali-
fied repair person using only identical re-
placement parts. This will ensure that the
safety of the power tool is maintained.
3. Safety Instructions for the Garden Shred-
der
• Wear protective gloves, glasses, and ear pro-
tection. Do not wear loose-fitting clothing.
• Always position the unit so as to be secure and
balanced. Do not lean on the unit.
GB | Operating Instructions
• The machine must be located on an even, sta-
• Before using, ensure that all screws and nuts
• Only use in dry conditions and never during
• Do not use the machine with damaged pro-
• Keep hands, other body parts and clothing well
• • Never place your face or other body parts in
• Do not leave the machine unattended. Shut off
• Do no feed any hard objects into the funnel
• If the machine becomes blocked: shut off the
• If the fuse has blown or the overload protec-
• Do not pull on the extension lead. Do not make
• Always keep the extension lead away from the
• If the cable is damaged, it must be replaced by
• Never move the machine by pulling the cable.
• Before using the shredder for the first time it
• Only use extension leads which are suitable
• Before using the unit ensure that there is no
• Always shut down the shredder before unplug-
• Keep children and animals away from the
GB-3
ble surface during operation.
are tightly fastened.
rainy weather.
tective equipment or without protective equip-
ment.
away from the feeding funnel and the ejection shaft.
the proximity of the feeding funnel.
the motor and unplug the unit.
such as stones, bottles, cans or pieces of met-
al. This could damage the machine.
motor, unplug the unit, remove all objects from
the machine and check it for damages.
tion has been triggered, this means that the
machine was overloaded and/or that too many
devices are connected to the same extension
lead. Look for the cause and fix the problem.
Do not install a stronger fuse.
the lead too tight. This could damage the plug
or the cable insulation. This type of damage
may not be visible, but can be dangerous.
machine. Remove the plug from the socket
and check the cable regularly for signs of dam-
age or aging. Do not use the machine with a
damaged extension lead.
a specialist in order to prevent accidents.
Do not move the machine while the motor is
running.
must be assembled properly.
for the outdoors.
damage to/problems with the cable.
ging the cable and/or extension lead.
shredder. All others must keep a safe distance
from the shredder when it is operating.