Connecting To A Home Network - Mitel 6920 Quick Reference Manual

Mitel 6920/6920w SIP Phone - Quick Reference Guide

Connecting to a home network

1. Navigate to Settings > Wi-Fi.
2. The Available Networks settings menu is displayed.
3. Select an SSID (that is, the name of a Wi-Fi network; for example, Home Network)
from Available Networks press Connect softkey. If the SSID is secured, a password
prompt appears.
Note: You can connect to only one SSID at a time. The SSID can be any alphanumeric, case-sensitive
entry from 2 to 32 characters. The characters allowed for the SSID depend on the router configuration.
© Copyright 2023, Mitel Networks Corporation. All Rights Reserved.
The trademarks, service marks, logos and graphics (collectively "Trademarks") appearing on Mitel's Internet sites or in its publications are registered and unregistered trademarks of Mitel Networks Corporation (MNC) or its subsidiaries (collectively "Mitel") or others.
Use of the Trademarks is prohibited without the express consent from Mitel. Please contact our legal department at legal@mitel.com for additional information. For a list of the worldwide Mitel Networks Corporation registered trademarks, please refer to the website:
http://www.mitel.com/trademarks.
Mitel's Power Over Ethernet (PoE) Powered Device (PD) products are covered by one or more of the U.S. patents (and any foreign patent counterparts thereto) identified at Mitel's website: www.mitel.com/patents. For more information on the PD patents that are licensed,
please refer to www.cmspatents.com.
4. Enter the password for the network and select the Save softkey.
Note: If you enter an incorrect password, the following dialog box appears. Ensure you enter the
correct password.
5. The Save Settings dialog box appears. Click Yes to reboot the phone and apply the