Mitel 6920 Quick Reference Manual page 7

Mitel 6920/6920w SIP Phone - Quick Reference Guide
5. Enter the domain password for the network and select the Save softkey.
Note: If you enter an incorrect password, the following dialog box appears. Ensure you enter the
correct password.
6. The Save Settings dialog box appears. Click Yes to reboot the phone and apply the
© Copyright 2023, Mitel Networks Corporation. All Rights Reserved.
The trademarks, service marks, logos and graphics (collectively "Trademarks") appearing on Mitel's Internet sites or in its publications are registered and unregistered trademarks of Mitel Networks Corporation (MNC) or its subsidiaries (collectively "Mitel") or others.
Use of the Trademarks is prohibited without the express consent from Mitel. Please contact our legal department at legal@mitel.com for additional information. For a list of the worldwide Mitel Networks Corporation registered trademarks, please refer to the website:
http://www.mitel.com/trademarks.
Mitel's Power Over Ethernet (PoE) Powered Device (PD) products are covered by one or more of the U.S. patents (and any foreign patent counterparts thereto) identified at Mitel's website: www.mitel.com/patents. For more information on the PD patents that are licensed,
please refer to www.cmspatents.com.
changes.
Note: After the phone restarts the LAN and PC ports are disabled (as it relates to network
communications).
7. After the phone reboots, it is successfully connected to the network. The connected
network (Mitel) is listed under Saved Network.
8. To disable Wi-Fi and use the LAN port again, navigate to Settings > Wi-Fi and press
the Disconnect softkey. The Save Settings dialog box appears.
9. Click Yes to reboot the phone and apply the changes.