Rcd Test - METREL OmegaEE XD MI 3365 Instruction Manual

MI 3365 /25A /M /F OmegaEE XD

6.2.14 RCD test

Test results / sub-results
t ∆N
t I∆N x1, (+)
t I∆N x1, (-)
t I∆N x5, (+)
t I∆N x5, (-)
t I∆N x0.5, (+)
t I∆N x0.5, (-)
I∆
I∆ (+)
I∆ (-)
Uc
Test parameters
RCD type
Nominal current
Test mode
Multiplication factor IΔN
Phase Starting polarity
in single mode
RCD Standard
Random phase
*only if AS/NZS 3017 RCD Standard is selected
Test limits
Uc
Test limits for Pass / Fail statuses are set automatically, depending on set parameters.
Test circuit
trip out time
trip-out time (I =I , (+) positive polarity)
  N
trip-out time (I =I , (-) negative polarity)
  N
trip-out time (I =5I

trip-out time (I =5I

trip-out time (I =½I

trip-out time (I =½I

trip-out current
trip-out current ((+) positive polarity)
trip-out current ((-) negative polarity)
Contact voltage
Type [AC, A, B, B+, F]
IΔN [10 mA, 15 mA, 30 mA]
Mode [single, auto]
Multiplier [0.5, 1, 5]
Phase [+, -, (+,-)]
RCD standard [EN 61008 / EN 61009, AS/NZS 3017]
Random phase [No, Yes]*
Contact voltage limit [Custom, 25 V, 50 V]
101
, (+) positive polarity)
 N
, (-) negative polarity)
 N
, (+) positive polarity)
 N
, (-) negative polarity)
 N
Single tests