Using The Delay Start Facility; The Timer - Zanussi MWi 771 Instructions Manual

2. PUSH TIME OR | €
TEMPERTURE PAD AGAIN; next
memory will be displayed.
3. PUSH [I^ | START PAD to return to
time counting or actual temperature.
To Change the Programme
Time or opidi
1. PUSH [X | TIME OR
TEMPERATURE PAD emi memory to
be changed is in the display.
2. PUSH [ 2 ]CHANGE/CANCEL PAD
ONCE. Oven will stop.
3. Enter new time or temperature by
touching number pads.
4. PUSH Lb ] START.
Power
1. PUSH [ X | TIMEOR t ;
TEMPERATURE PAD until memory to be
changed is in the Display.
2. PUSH | X | POWER LEVEL PAD.
Oven will continue to run.
3. Enter new power setting.
4. PUSH [IP ] START PAD and oven will
resume operate at new Power setting.
Using the Delay Start Facility
The delay start feature on your microwave
oven means you can delay the start of
cooking for up to 24 hours after the oven
has been programmed.
Points to Remember
1. Select the foods to be cooked carefully. It
is advisable not to use foods that perish
easily such as eggs, milk, fish or fresh meat
and poultry.
2. Avoid recipes that require stirring.
3. Reduce the cooking times slightly as the
food will be a little warmer than usual
because it has been standing in the
microwave prior to cooking.
Operating the Delay Start
1. Check the time in the display window is
correct. If not change it following the
instructions previously described.
8. PUSH THE
2. Place the food in the oven and close the
door.
3. PUSH THE DELAY START
PAD. The colon and Delay Start Indicator
Light will appear in the display window.
4. SET THE DESIRED START TIME.
Push the appropriate number pads for time
of day when the food should start cooking.
(REMEMBER THE CLOCK IS 24 HR)
5. PUSH THE TIME PAD ORL
TEMPERATURE PAD. The display
window will show a colon or a 'C' and the
Memory I Indicator Light will come on.
6. Set the cooking time or temperature by
pushing the appropriate number pads. Set
the power level by pushing the power level
pad and then the appropriate number pad.
7. If two memories are to be used repeat
steps 5 and 6 second time to programme a
second memory.
b | START PAD. The
time of day will appear in the display
window. The clock, delay start and memory
indicator lights will be on. The oven will
start cooking automatically at the
programmed start time. The cooking time
or temperature will then be displayed.
To Check the Programme
1. PUSH THE [ P | DELAY START PAD
TO CONFIRM THE STARTING TIME.
2. PUSH THE [X] TIME OR THE[ € )
TEMPERATURE PAD TO CONFIRM
TIME OR TEMPERATURE SET.
3. PUSH THE | X | POWER LEVEL
PAD TO CHECK THE POWER LEVEL
SET.
The Timer
The timer has many uses when cooking
with the microwave and of course it can
also be used as a minute timer when
cooking conventionally.