Cooking With Memories - Zanussi MWi 771 Instructions Manual

Cooking With Memories
Your Zanussi microwave has two memories
which can be programmed to use any
combination of variable power settings,
time or temperature. Many microwave
recipes use different power settings at
various times during the cooking process.
The memory feature once programmed
automatically changes power settings,
cooking times, or temperatures. A tone will
sound when the memory changes
programme which helps to remind you at
what stage you are in the recipe. The
memories also have a Delay Start feature
enabling the microwave oven to be
programmed to cook automatically.
Here are a few ways in which the memory
feature can be used:
@ Let the memory tone remind you to stir
the sauce or add the remaining
ingredients to a main dish or stew.
@ Use the memory with the Minute Timer
(0 Power) to time the standing time
after cooking or defrosting.
@ Use the memory tone to remind you
when to baste the chicken.
© Let the memory automatically alter the
power setting for those recipes that
require different power levels during
their cooking, such as soups, cakes, and
casseroles.
Operating With Memories
1. OPEN DOOR. The interior light will
come on.
2. PLACE THE FOOD IN THE OVEN. If
cooking by temperature insert the
temperature probe into the food and the
plug into the socket.
3. CLOSE THE DOOR. The oven is ready
to be programmed.
4. PUSH THE TIME PAD OR THE
[X TEMPERATURE PAD. The
indicator for Memory 1' will be displayed.
5. SET THE DESIRED TIME OR
TEMPERATURE PUSHING THE
APPROPRIATE NUMBER PADS. The
time or temperature selected will appear in
the display window.
6. PUSH THE [Z] POWER LEVEL
PAD. The indicator for power will be
displayed and 'HP will appear in the display
window. This is to remind you that the oven
will always operate at full power unless you
change the power level.
7. SELECT THE POWER LEVEL YOU
DESIRE.
DO NOT PRESS THE | Ib. |] START PAD.
To Enter the Second Memory
: PUSH THE TIME PAD OR THE
[x [TEMPERATURE PAD. The
indicator light showing that you are in
"Memory 2' will appear.
9. Programme in the next set of cooking
instructions as for Memory I'.
10. PUSH THE ( i» | START PAD. The
oven will begin to cook using 'Memory 1'
instructions you have set.
11. When the oven has completed Memory 1
instructions a tone will sound once and the
oven will automatically switch to the second
memory. The indicator light will show that
the oven is cooking in the second memory.
12. At the end of the cooking time the tone
will sound three times and then if the oven
is programmed to cook by temperature it
will automatically revert to the Hold-Warm
programme until it is cancelled.
18. OPEN THE DOOR REMOVE THE
FOOD (AND PROBE IF cues CLOSE
THE DOOR.
To Check the Programme Set
Time or Temperature
1. PUSH TIME ORL]
TEMPERATURE PAD. Time or set
temperature will be displayed.