Important Safety Instructions - Nautilus R628 Service Manual

™
NOTICE: This document provides important safety instructions, adjustments, and general troubleshooting information for the maintenance of
the Nautilus R628 Recumbent Bike.
™
If you need assistance, please contact Customer Service (if purchased in US/Canada) or your local distributor (if purchased
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand
all Warnings on this machine.
ORIGINAL DOCUMENT - ENGLISH VERSION ONLY

Important Safety Instructions

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and
understand all Warnings on this machine.
Read and understand the Service Manual before working on the machine. Failure to obey the instructions and safety warnings
could cause injury to the service technician or bystanders.
To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug this machine from the
electrical outlet immediately after using and before cleaning. Place the power cord in a secure location.
• Keep bystanders and children away from the product being serviced at all times.
• Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do
maintenance steps involving these components. Do not try to do heavy or awkward steps on your own.
• If replacement parts are necessary, use only genuine replacement parts and hardware supplied by Nautilus. Failure
to use genuine replacement parts can cause a risk to users, keep the machine from operating correctly and void the
warranty.
• Be sure that all warning stickers and instructional placards applied to the product stay present and in good condition
when doing maintenance or replacing components. If at any time the Warning labels become loose, unreadable
or dislodged, replace the labels. If purchased in US/Canada, contact Customer Service for replacement labels. If
purchased outside US/Canada, contact your local distributor for them.
• Do not put the machine back in service until all shrouds, instructions, warning labels and correct functionality have
• Connect this machine to a properly grounded outlet only (see Earthing Instructions).
• Keep the power cord away from heat sources and hot surfaces.
• Do not operate where aerosol products are being used.
Important Safety Instructions and General Troubleshooting
Information for the Nautilus
™
®
R628 Bike
™
® ®
2
® ®
Service Procedures