PROAIM SC-01 Assembly Manual

Snaprig universal clamp with 5/8" socket fits 60mm speed rails/scaffold tubes

Snaprig Universal Clamp with 5/8" Socket Fits

60mm Speed Rails/Scaffold Tubes

(SC-01)

A s s e m b l y M a n u a l

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed

below.

Proaim Snaprig Universal Clamp with 5/8" Socket

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Table of Contents

Need help?

Do you have a question about the SC-01 and is the answer not in the manual?

Page 1 Please inspect the contents of your shipped package to ensure you have received everything that is listed below. Proaim Snaprig Universal Clamp with 5/8" Socket All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher.
Page 2 SnapRig Universal Clamp with 5/8” Socket Setup • Loosen the knob of Universal clamp with 5/8” Socket and open it as shown in the image. Note: The Clamp is equipped with one 5/8" socket, one 1/4″-20 and one 3/8″-16 female threaded hole, making it possible to mount multiple equipment in one clamp.
Page 3 YOUR PROAIM SNAPRIG UNIVERSAL CLAMP WITH 5/8" SOCKET FITS 60MM SPEED RAILS/SCAFFOLD TUBES ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.