PROAIM SS-CT Assembly Manual

Stabilizer system for camera production carts

Stabilizer System for Camera Production Carts

(SS-CT)

A s s e m b l y M a n u a l

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that

is listed below.

2 Stage Riser and 5/8" Baby Pin Adapter

Vest Mount Default

System

Bumper with Clamp

Accessory Cross Bar Clamp

with 4 x Locking knobs

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Table of Contents

Need help?

Do you have a question about the SS-CT and is the answer not in the manual?

Page 1 Stabilizer System for Camera Production Carts (SS-CT) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2 Stabilizer System Setup  Loosen the locking knob of the vest mount default system and attach it to the cart post.  Tighten the locking knob of the vest mount default system to secure it.  Easily hang the flycam flowline onto the vest mount default system, as shown in the image.
Page 3 Lastly, again Insert the 2 Stage riser with 5/8” baby pin adapter into the crossbar clamp and tighten the ratchet knob to secure it. YOUR PROAIM STABILIZER SYSTEM FOR CAMERA PRODUCTION CARTS ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES)
Page 4 Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us.