PROAIM SR-SBP-01 Assembly Manual

Quantum shoulder rig w vct mount

Quantum Shoulder Rig w VCT Mount

(SR-SBP-01)

A s s e m b l y M a n u a l

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed

below.

Base Plate

2 x Handles

2 x 15mm & 12" Long 300mm Female Rods

2 x 15mm & 8" Long 200mm Female Rods

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Table of Contents

Need help?

Do you have a question about the SR-SBP-01 and is the answer not in the manual?

Page 1 Quantum Shoulder Rig w VCT Mount (SR-SBP-01) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2 Quantum Shoulder Rig Setup  Loosen the knob of the base plate and insert the 200mm long rod.  Then insert the second 200mm long rod and tighten it properly with the knob, as shown in the image.  Loosen the knob on the other side of the base plate and insert the 300mm long rod.
Page 3  Then attach the second handle and tighten it properly.  By pressing the adjustment knob, the angle of the handle can be changed according to your requirement, as shown in the image. NOTE: It allows your camera set up to sit comfortably on your shoulders by eliminating the discomfort caused by the camera's weight on your shoulder during shooting.
Page 4 Blackmagic (Ursa Mini), and many other camera models with interchangeable lenses. YOUR PROAIM QUANTUM SHOULDER RIG W VCT MOUNT ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.