Electrical Connection - Technogym VISIO E0000236 Installation Requirements

4.2 ELECTRICAL CONNECTION

Before connecting the product to the mains power supply, ensure that the electrical system
specifications comply with current regulations. Check the specifications of the power supply on the
product's identification label.
Remove the cap covering the connector.
Connect the power supply unit to the product first and then plug it into the wall socket.
Put the cap back in place.
WARNING: Check the power supply unit periodically to verify its integrity. The wall
socket must be located in a place where the product may be easily and safely plugged
in and unplugged.
- 16 -
TECHNOGYM VISIO 32" Pre-Installation Requirements
Fig. 6
PIR-00328-EN - Uncontrolled copy if printed
Rev. 1.0