Electrical connection (700 version)
Before connecting the equipment to the mains power supply, ensure that the electrical system specifications comply to binding
regulations. Check the mains power supply specifications on the equipment identification label.
D
anger
The wall socket must be located in a place where the plugging and unplugging can be done easily and
safely.
When plugging in, the switch on the equipment must be in the 0 position (i.e. the equipment must be switched off).
Plug the power cable first into the equipment socket and then into the wall socket.
W
arning
Check the state of the power supply cable periodically.
Top
07081017
cont.