Preface; Product Identification / Product Information; Receiving Inspection - darda C2S Product Manual

1
1.1
1.2
1.3
IM Hydraulic Stone and Concrete Splitter, Version 1.0 04/2010
Introduction

Preface

Dear – Customer,
– Operator,
You are about to
– operate
– maintain or
– convert
type C stone and concrete splitter(s).
This manual is intended to provide you with the information required to carry out
these important tasks.
Please read this manual carefully!
Act exactly in accordance with the descriptions provided!
Be absolutely certain to heed the safety instructions!
We will be happy to answer any questions you may have. The telephone / fax
numbers, as well as the email and internet addresses can be found in the credit
notes on the first page of this manual.

Product Identification / Product Information

The Darda type C splitters are used for splitting natural stone and concrete.
The descriptions in this product manual relate to splitter types C2S, C4S, C9, C10S
and C12 from Darda GbmH.
The splitting devices are available in different designs that can be identified in the
appendages to the names. The name appendages describe the used splitting
heads (e.g. "N" for a standard splitting head).

Receiving Inspection

Immediately after unpacking, inspect
– the splitter for transport damage and defects,
– the completeness of the delivery with reference to the delivery note,
– any accessories included in the delivery.
Make certain that no parts remain in the packaging and dispose of the packag-
ing in accordance with the national or regional regulations if there is no reason
for complaint.
1 Introduction
Best wishes,
Darda GmbH
1