Splitter Types C9, C10S, C12 - darda C2S Product Manual

6.2
6.2.1
OM Hydraulic Stone and Concrete Splitter, Version 1.0 04/2010
Splitter Type C9, C10S, C12
Exchanging the pressure pieces
A
1 Screwdriver
2 Hooks (2 x, right and left)
3 Splitting wedge
4 Pressure piece
Fig. 6-2-1 - 1 Exchanging the pressure pieces
Retract the splitting wedge (3) completely (operating lever in position R).
Press both hooks (2), e.g. with a screwdriver, down or up (fig. A).
Slide both pressure pieces together with the splitting wedge to the right (fig. B).
Turn the left pressure piece 90º and pull it out (fig. C).
Insert another pressure piece on the left side or slide the right pressure piece
together with the splitting wedge to the left.
Turn the right pressure piece 90º and pull it out.
Now change the splitting wedge as described on the next page or assemble
other pressure pieces in the reverse order.
6 Replacing Splitting Heads
B C
31