Safety Information For Certain Types Of Use - darda C2S Product Manual

2.2
2.2.1
2.2.2
2.2.3
OM Hydraulic Stone and Concrete Splitter, Version 1.0 04/2010

Safety Information for Certain Types of Use

Hazards caused by hot surfaces
Even after a short operation time or after longer idle times, the hydraulic
hose assemblies or other device parts can already or still be hot!
In case of skin contact, serious burns may be incurred!
Note that during normal operation the hydraulic oil may reach a tempera-
ture of up to 80 °C!
Never open the screw connections of the hydraulic device parts that are
hot (or highly pressurised)!
Before starting work at hydraulic device parts, check whether you can
work safely at the given temperature! Before starting work at hydraulic
device parts, let them cool down sufficiently if need be!
Wear protective gear that is appropriate for all the work with or on the
devices!
Hazards from the surroundings
There are dangers from the surroundings.
Surrounding dangers are dangers that can emerge at the site where the de-
vices are used, but are not caused by them.
Observe the surroundings when working with the devices and stop your work
immediately if you notice dangers and inform the operator / construction man-
agement team in charge.
Evacuate the danger zone, if need be.
Hazards from insufficient lighting
In the event of insufficient light when working with the device, there is a dan-
ger of bodily injury and / or material damage.
The person in charge of the splitting site is to ensure that minimum lighting
power of 200 Lux is present in the work area of the device.
2 Safety Instructions
9