Safety Instructions For Conversion - darda C2S Product Manual

2 Safety Instructions
2.5.2
2.5.2.1
2.6
14
Hazards from operating material
Hazards from hydraulic oil
When working in the area of hydraulic supply lines, danger can result from
– – suddenly escaping hydraulic oil,
– – contact with hydraulic oil that damages your health.
Only perform work on the hydraulics
– when the hydraulic hoses are not pressurised.
– Note that even if the hydraulic supply is deactivated, there still
may be danger arising from hydraulic oil which possibly remains
in the hoses and which may be pressurised!
Regularly check that the hydraulic hoses and their connections are in the
proper state!
Use personal protective gear suited for all activities!
If you have swallowed or breathed in hydraulic oil,
– seek out medical treatment immediately. Inform the doctor of emer-
gency measures recommended by the hydraulic oil manufacturer!
– If you have got hydraulic oil in your eyes, on your skin or clothing,
– take the recommended emergency measures,
– contact a doctor immediately.

Safety Instructions for Conversion

We call your attention expressly to the fact that the conversion and the hy-
draulic installation of the device may only be carried out by trained and
authorised personnel with a profound mechanical and hydraulic knowledge!
Carry out the conversion in accordance with the professional associa-
tion's safety instructions and the regulations for the prevention of acci-
dents!
Only use correct and functional parts / tools for converting the device!
Only carry out the conversion of the device while heeding the descrip-
tions in this product manual!
Before converting the device, be sure to take it out of operation as
described in chapter 5.5 and secure it against accidental start-up.
OM Hydraulic Stone and Concrete Splitter, Version 1.0 04/2010