Complaints; Guarantee And Liability; Declaration Of Conformity - darda C2S Product Manual

1 Introduction
1.8
1.9
1.10
4

Complaints

Damage claims arising from transport damage will only be honoured if the manu-
facturer and the delivery company are notified immediately.
Immediately fill out a damage report for a returned shipment (due to transport
damage / repairs) and send the parts back to the manufacturing plant in their
original packaging, if possible.
Record possible transport damage on the shipping documents upon receipt of
the goods!
Enclose the following details in the returned shipment:
– Name and address of the sender and recipient
– Type and serial number of the device (
– Description of the defect
– In case of transport damage: delivery company name and, if possible,
exact time of delivery, driver's name and registration number of the delivery
vehicle

Guarantee and Liability

In principle, our General Sales and Delivery Conditions apply to the use of the
devices. Agreements which deviate from these have to be agreed in writing and
confirmed by us! The General Sales and Delivery Conditions are given to the op-
erator together with the offer. Guarantee and liability claims in respect of personal
injury or damage to property will not be honoured if they arise from one or more of
the following causes:
– use of the device for purposes other than those for which it is intended.
– operation of the devices with defective safety equipment or incorrectly installed
or non-functional protection and / or safety equipment.
– disregard of the instructions in this product manual in respect of safety, trans-
portation, storage, installation, commissioning, operation, maintenance and re-
pair of the devices.
– improper installation, commissioning, operation, maintenance and repair of the
devices.
– deficient monitoring and maintenance of parts which are subject to wear (e.g.
cutting heads, crushing tips, oil filter).
– unauthorised structural changes to the devices.
– natural disasters, foreign matter impacts and acts of God.
To ensure the functional safety, only original replacement parts from the manufac-
turer may be used.

Declaration of Conformity

You will find the Declaration of Conformity at our website under
http: //www.darda.de
IM Hydraulic Stone and Concrete Splitter, Version 1.0 04/2010
Chapter 2, Device Data Sheet)