Responsibilities Of The Personnel - darda C2S Product Manual

1 Introduction
1.6
6

Responsibilities of the Personnel

Before beginning work, all persons entrusted with jobs using the devices are re-
quired
– to heed the fundamental regulations on industrial safety and accident preven-
tion.
– to read the safety instructions and the warning information contained in this
product manual and to confirm with their signature that they have understood
them.
(
Please regard the following instructions in the interest of all staff:
Refrain from any method of working which might present a safety risk!
Follow all danger and warning instructions in this product manual!
Please also regard the general, statutory and otherwise binding regulations on
industrial safety, accident prevention and environmental protection!
Regard the fire-alarm and fire-fighting possibilities and
inform yourself about the location and operation of fire extinguishers!
Wear the protective clothing that is appropriate for the work to be performed!
Do not have open long hair, loose clothing or jewellery (including rings)!
Perform only work for which you have been sufficiently trained and instructed!
Do not perform any service work without prior consultation with the manufac-
turer and the operator!
Do not make any structural changes without approval in writing from the manu-
facturer (except what is described in this product manual)!
Ensure that other persons who do not work with the devices (and consequently
do not know the risks of the devices) cannot enter into the danger zones.
Shut down the devices in case any danger occurs! Protect the device against
accidental start-up and notify the operator / supervisor immediately!
OM Hydraulic Stone and Concrete Splitter, Version 1.0 04/2010
IM, Annex A – List of Signatures)