Safety Instructions For Transport; Safety Instructions For Commissioning - darda C2S Product Manual

2.7
2.8
OM Hydraulic Stone and Concrete Splitter, Version 1.0 04/2010

Safety Instructions for Transport

When transporting the device, the applicable work protection measures are
to be considered!
Secure the device in accordance with the requirements for transport (e.g.
with lashing straps) to prevent slippage.

Safety Instructions for Commissioning

We call your attention expressly to the fact that the conversion and the hy-
draulic installation of the device may only be carried out by trained and
authorised personnel with a profound mechanical and hydraulic knowledge!
Make sure there are no potential hazards for persons or the environment
when commissioning the device!
Make sure that no persons linger or enter the danger zone of the device or
this area in general during commissioning!
Take measures that provide warnings before commission the device!
Before any commissioning, check
– proper functioning of the device!
– whether the device and all its components are free from contamination,
wear, deformation, damage and corrosion!
– whether all parts and fixtures fit tightly!
– hydraulic hoses and connections for leakage!
– whether the device has been lubricated sufficiently!
– the correct assembly of the splitting heads
– the condition of all wear parts.
Before beginning work, plan your procedure and execute the work me-
thodically!
If necessary, consult experts and ask them for information or advice!
Never direct the device against persons if it is fully operational!
Do not put into operation a device whose functional / operational safety is
not ensured / present!
2 Safety Instructions
15