Advertisement
III. Accessory Parts
Note:
(C7000/C7000P/C6000/C70hc only)
• In the combination of machine + RU +LS, the
LS-505 needs power supply from outside. In this
case, use a power code(for option) included in
the machine. Use the one which meets your
country specification.
(C8000 only)
• When the LS-505 is installed, the external
power source might be required. Prepare the
power cord. (Not bundled in the LS-505)
No.
Name
1. Installation
plate/1
2. Installation
plate/2
3. Installation
plate/3
4. Connector
cover
5. Stacker tray
6. S-tapping screw
(Hexagon)
M4x8
7. Relay power
cord
8. Installation
manual
Shape
Q'ty
2
15ATIXC002SA
2
15ATIXC003SA
1
15ATIXC004SA
1
15ATIXC005SA
1
15ATIXC006SA
10
1
1
E-2
IV. Preparation Prior to Installation
1. Visually inspect the LS-505.
2. Remove the locking tape on the front door and the
cover sheet on top of the LS-505.
Cover sheet
3. Open the front door of the LS-505, remove the
locking materials (4) on the handcart, and pull out
the handcart.
Locking materials
4. Remove the locking tapes and the protection
material within the LS-505.
Locking tapes
Locking tapes
Locking tapes
15ATIXC005SB
A0H1IXC001CA
Locking tapes
Protection material
15ATIXC007SC
Advertisement
