Advertisement
Note:
In case those screw holes height do not match to
fix the installation plate/2 and the installation plate/
3 by screw, adjust the height of LS-505 casters (4
parts) to mach those screw holes.
Every caster has ratchet mechanism.
It goes up with reciprocating the driver into the
whole 1, and it goes down with reciprocating the
driver into the whole 2.
Be sure not to go it up too much, otherwise the bolt
would come off. (max. ±5mm)
(Be sure the caster is contacting installation sur-
face, otherwise the ratchet will not work.)
2. Install the handcart to the LS-505.
3. Close the front door of the LS-505.
Driver sockets
Skew adjustment
15ATIXE001CB
15ATIXC001CA
E-12
Installation procedure for
[LS-505+RU-508+EF-101+C8000]
*
For the installation procedure for the RU-508,
see the RU-508 installation manual.
1. Install LS-505 to the combination of RU-508.
(1) Install the Installation plate/1 (2 places) and the
Installation plate/2 (2 places) on the left side of
RU-508 as below. (S-tapping screw M4x8: 8
pcs.)
Installation
plate/1
S-tapping screws M4x8
(2) Unplug the LS-505 connector shown in the
photograph.
Installation
plate/2
S-tapping screws M4x8
A0H1IXC018CA
Connector jack
LS-505
15ATIXC005CB
Advertisement
