Safety Instructions - Parkside PPS 40 C3 Operation And Safety Notes Translation Of The Original Instructions

• Safety instructions

WARNING!
f Please read through the
operating instructions care-
fully before use. Familiarise
yourself with the device, its
proper use and the safety
instructions based on these
operating instructions. These
form part of the product
and must be available at all
times.
WARNING!
f RISK OF SERIOUS
INJURY OR DEATH
FOR INFANTS AND
CHILDREN! Never leave
children unsupervised near
packaging material. There is
a risk of suffocation.
„
This device may be used by
children aged 16 years and
older, and by persons with
reduced physical, sensory or
mental capacities, or a lack of
experience and knowledge,
if they are supervised or have
been instructed in how to use
the device safely and under-
stand the dangers that may
arise when using it. Do not
allow children to play with the
device. Cleaning and day-to-
day maintenance must not be
performed by children without
supervision.
„
Repairs and/or maintenance
work must only be carried out
by qualified electricians.
„
Only use the cutting cable
provided in the scope of
delivery.
„
During operation, the device
should not be positioned
directly against the wall,
covered or jammed between
other devices so that sufficient
air can always be absorbed
through the ventilation slats.
Make sure that the device
is correctly connected to the
supply voltage. Avoid any
form of tensile stress of the
power cable. Disconnect the
mains plug from the socket
prior to setting up the device in
another location.
„
If the device is not in opera-
tion, always switch it off by
pressing the ON/OFF switch.
Place the electrode holder on
an insulated surface and only
remove the electrodes from the
holder after allowing it to cool
down for 15 minutes.
Hot metal and sparks are
blown off from the cutting arch.
9
GB