Storing Your Machine - Bissell REVOLUTION PET PRO 2283 User Manual

Storing Your Machine

When finished using the product, wrap cord around cord wrap for storage. Store your
machine in a protected, dry area.
1
The Rinse & Storage Tray offers
on-board tool storage to help organize
your deep cleaning supplies.
Cleaning Machine After Use
WARNING
To reduce the risk of electric shock, turn power OFF and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
First, fill the Clean Water Tank
with warm tap water and then
empty it all to rinse. Then fill
again with warm tap water and
return the tank to the machine.
Twist cap back on tightly.
2
Your machine sits snug on the Rinse &
Storage Tray while not being used. Make
sure both tanks are dry and emptied,
and everything is stored in a protected,
dry place.
To flush and rinse the machine: Turn the machine
ON and press the trigger for 15 seconds while
making back and forth passes on a section of carpet.
Finally, release the trigger and extract the water.
See page 15 to clean the Dirty Water Tank from the
water that was just extracted.
www.BISSELL.com
13