Bissell Little Green HydroSteam, 3532 / 3618 / 3605 / 3606 Series Manual

Table of Contents

Contents

1 Product Overview
2 What's in the Box
3 Filling the Formula Tank
4 Stain/Surface and Tool Guide
5 Using Your Machine
6 Emptying the Dirty Water Tank
7 Cleaning and Storing Your Machine
8 Thermal Protector
9 Troubleshooting
10 IMPORTANT SAFETY INSTRUCTIONS
11 Documents / Resources
- 11.1 References
- 11.2 Download manual

Product Overview

Power and Cleaning Mode Dial
Steam Ready Light
Clean Water Tank
Dirty Water Tank
Quick Release Cord Wrap and Power Cord
Flexible Hose

What's in the Box

Standard accessories may vary by model. To identify what should be included with your purchase, please refer to the "Carton Contents" list located on the carton top flap.

Filling the Formula Tank

Find more formulas at BISSELL.com.

This machine is compatible with BISSELL formulas made for portable carpet cleaners. Always use genuine BISSELL formulas in your machine. Use of other cleaning formulas may harm the machine.


Choose your formula.* Visit BISSELL.com for formulas.	Remove clean water tank from back of machine by lifting carry handle.	Flip cap open.

Add water to line based on size of your mess. Small Area: 28 oz Large Area: 56 oz	Add formula** to line based on size of your mess. Small Area: 4 oz Large Area: 8 oz	Close cap. Return clean tank to machine and click back into place.

*Compatible BISSELL formulas include: Spot & Stain, PRO OXY Spot & Stain, PET Spot & Stain, PET PRO OXY Spot & Stain, SIMPLY **Machine may be used without formula; however, BISSELL recommends using only distilled water to prevent hard water buildup and prolong the life of your machine.

burn hazard
To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning formula intended for use with this machine.

Stain/Surface and Tool Guide

To purchase additional tools or formulas, visit BISSELL.com.

3" Tool
Great for hard-to-reach areas and small stains.

5" Tool
Wider clean path for upholstery, curtains, car interiors, stairs, and larger stains.

Multi-Surface Tool
Clean unique areas like tile and grout, sneakers, car consoles, and more.

Cleaning Mode	SteamWash Max Clean Mode	Steam Mode	Wash Mode
Cleaning Method	Spray + Steam	Steam	Spray
Description	HydroSteam and formula penetrate the toughest messes for fast and effective stain removal.	Loosen stains and refresh carpets and upholstery.	Water and formula scrub away everyday dirt and stains.
Recommended Tools	3", 5"	5", Multi-Surface Tool	3", 5"
Recommended Surfaces	Carpet, Area Rugs, Upholstery	Tile/Grout, Drapes, Upholstery	Carpet, Area Rugs
Beverages: Coffee, Cola, Fruit Juice, Red Wine, Tea
Oily Messes: Cooking Grease, Pasta Sauce
Sticky Messes: Chocolate Syrup, Honey, Jelly
Pet: Vomit, Blood, Grass, Dirt, Urine, Feces
Dairy: Milk, Yogurt, Baby Formula

Check the manufacturer's tag before cleaning upholstery. "W" or "WS" on the tag means you can use your Little Green HydroSteam. If tag is coded with an "S" (with diagonal strike-through), or says "Dry Clean Only," do not proceed. If manufacturer's tag is missing or not coded, check with your furniture dealer.

Using Your Machine

Note: This appliance is primarily a portable carpet cleaner with a steam-cleaning attachment.

Before you clean, vacuum to remove loose dirt from areas to be cleaned. Spray any BISSELL stain pretreat formula on soiled areas and allow to sit for a few minutes. Test a small, hidden area for colorfastness and examine when dry. If color is affected, do not use.


Release hose by pulling away from hose clip.	Attach desired tool to hose grip until it clicks.	Twist Quick Release Cord Wrap to remove cord. Plug cord into outlet.

Select cleaning mode to turn machine ON. Turn dial to (O) position to turn OFF.	If choosing a mode with steam, wait 30 seconds for steam light to illuminate.	Press and hold trigger over sink or bowl to prime the machine until steam is present.

Point tool above stain. Firmly press and hold trigger.	Release trigger and use bristles to scrub area.	To remove stain, release trigger and make "dry passes". Firmly apply downward pressure and move tool slowly toward you until water can no longer be seen in nozzle.

Note: In Steam Mode or SteamWash Max Clean Mode, it is normal for some liquid to dispense during initial steam usage and after longer durations without using steam. The longer the trigger is pressed down, the more consistent the steam is. During periods without using steam, excess water may build up and dispense upon holding the trigger again. During these instances, continue to hold the trigger for 5-10 seconds until steam comes out.

Emptying the Dirty Water Tank

Find additional tips for maintaining your machine at support.BISSELL.com.


Empty dirty water tank when water reaches "MAX" line. Do not let water overfill.	Remove dirty water tank and carry to a disposal area.	Holding dirty tank from bottom, unlock and remove lid by rotating handle backward.

Pour out dirty water. Rinse out tank to remove any debris.	Align lid and rotate handle forward to lock into place.	Place dirty water tank back onto machine.

Cleaning and Storing Your Machine


Be sure to empty dirty water tank after use (see above).	Clean hose with HydroRinse Self-Cleaning Hose Tool: Attach tool to end of hose grip until it clicks.	Turn dial to SteamWash Max Clean Mode. With hose upright and machine ON, press HydroRinse trigger 30 seconds.

Hose Cleaning Alternative: Suction clean water from bowl (or bucket). Lift and stretch hose until all water is cleared. Do not suction >32 oz. water.	Lift latch on clear nozzle to remove. Then rinse. Wipe away any debris from steam nozzle.	Wrap hose for storage. Store indoors in a secure, dry location.

Thermal Protector

An internal thermal protector has been designed into your machine to protect it from overheating. When the thermal protector activates, the main motor will stop operating. If this happens, proceed as follows:

Turn machine OFF and unplug from electrical outlet.
Let the motor cool for approximately 30 minutes. The thermal protector will automatically reset, and cleaning may continue once plugged back in.

Note: If the thermal protector continues to activate after following the above steps, your machine may need servicing. Call BISSELL Consumer Care or visit the website.

Troubleshooting

Below are some of the issues you may run into. If you don't see the issue you're experiencing below, visit support.BISSELL.com.

Problem	Possible Cause	Remedies
Reduced/no spray	Clean water tank may be empty.	Refill tank.
	Clean water tank may not be seated properly.	Fully seat tank until it clicks into place.
	Spray tip may be clogged/dirty.	Clean spray tip.
Reduced/loss of suction	Dirty tank may be full.	Empty dirty tank.
	Red filter under dirty tank may be clogged.	Remove any debris from the red filter.
	Dirty tank may not be correctly seated.	Ensure there are no obstructions preventing the dirty tank from fully being seated in its recess.
	Dirty tank lid may not be correctly seated.	Ensure the lid is fully seated in the dirty tank and the handle fully locks the lid into place.
	Tool or hose may be clogged with hair/fibers/etc.	Remove any clogs.
Machine leaks	From bottom: Dirty tank has been filled beyond the "Max" line with water or foam.	Do not allow machine to collect liquid past the "max" line. Ensure only Bissell portable deep cleaner formulas are used, at the correct concentrations, to prevent excessive foaming.
	From hose/tool: Water remains in hose after turning off.	Run machine for several seconds after stopping suction to ensure water is sucked into dirty tank.
No/low steam	Clean water tank may be empty.	Refill tank.
	Machine not pre-heated.	Wait 30 seconds for "steam ready" indicator light to turn on.
	Water sprays instead of steam.	This is normal; a small amount of water condensate forms in the steam lines when steam is not used. Continue to hold the trigger and steam will come out within 5-10 seconds.
Steam ready light not illuminated after two minutes	Thermal Protector on heater has tripped.	Please visit an authorized service center.

Note: Any other servicing should be performed by an authorized service representative.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING YOUR APPLIANCE.
When using an electrical appliance, basic precautions should be observed, including the following:

burn hazard
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

Do not leave appliance when it is plugged in. Unplug from outlet when not in use and before servicing.
Do not expose to rain. Store indoors.
Always install float before any wet pick-up operation.
Use only cleaning products intended for use with this appliance to prevent internal component damage. See the Cleaning Formulas section of this guide.
Do not allow to be used as a toy. Close attention is necessary when used by or near children.
Do not use for any purpose other than described in this user guide.
Use only manufacturer's recommended attachments.
Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water; do not attempt to operate it and have it repaired at an authorized service center.
Do not pull or carry by cord, use cord as a handle, close door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
Do not handle plug or appliance with wet hands.
Do not put any object into openings. Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce air flow.
Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts of the appliance and its accessories.
Turn OFF all controls before plugging or unplugging appliance.
Use extra care when cleaning on stairs.
Do not use to pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.) or use in areas where they may be present.
Do not pick up anything that is burning or smoking, such as cigarettes, matches or hot ashes.
Unplug from outlet before filling, rinsing or cleaning.
Do not turn over the steam-cleaning nozzle, or touch the surface of the nozzle when using the steam-cleaner.
Do not apply steam directly to any person or animal.
Do not touch the steam cleaning nozzle or adjacent surfaces when steam-cleaning or when the nozzle is heated.
Do not turn your appliance ON until you are familiar with all instructions and operating procedures.
Keep appliance on a level surface.
Do not leave steam cleaner unattended.
Liquid or steam must not be directed towards equipment containing electrical components.
Do not use appliance in an enclosed space filled with vapors given off by oil-based paint, paint thinner, some moth-proofing substances, flammable dust, or other explosive or toxic vapors.
Do not use to pick up toxic material (chorine bleach, ammonia, drain cleaner, etc.)
Do not pick up hard or sharp objects such as glass, nails, screws, coins, etc.
Plastic film can be dangerous. To avoid danger of suffocation, keep away from children.
Connect to a properly grounded outlet only. See grounding instructions. Do not modify the three-prong grounded plug.

SAVE THESE INSTRUCTIONS
THIS MODEL IS FOR HOUSEHOLD USE ONLY. COMMERCIAL USE OF THIS UNIT VOIDS THE MANUFACTURER'S WARRANTY.

Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service person if you aren't sure if the outlet is properly grounded. DO NOT MODIFY THE PLUG. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is designed for use on a nominal 120-volt circuit and has a grounding attachment plug that looks like the plug in the illustration. Make certain that the appliance is connected to an outlet having the same configuration as the plug. No plug adapter should be used with this appliance.

shock hazard GROUNDING INSTRUCTIONS
This appliance must be connected to a grounded wiring system. If it should malfunction or break down, grounding provides a safe path of least resistance for electrical current, reducing the risk of electrical shock. The cord for this appliance has an equipment-grounding conductor and a grounding plug. It must only be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.

To reduce the risk of a leaking condition, do not store where freezing may occur. Damage to internal components may result.
Plastic tanks are not dishwasher safe. Do not put tanks in dishwasher.

Join us online for a complete guide to your new product, including troubleshooting, product registration, parts, and more.
Go to support.BISSELL.com