Related Manuals for Bissell REVOLUTION PET PRO 2283
Summary of Contents for Bissell REVOLUTION PET PRO 2283
- Page 1 REVOLUTION ™ USER GUIDE Models 2283, 22839 More of a video person? Look for this icon and go online for an instructional how-to video at www.BISSELL.com www.BISSELL.com...
-
Page 2: Important Safety Instructions
» Do not use without filters in place. by or near children. » Use only BISSELL® cleaning formulas intended for use with this » Do not use for any purpose other than described in this user guide. Use appliance to prevent internal component damage. See the “Cleaning only manufacturer’s recommended attachments. -
Page 3: What's In The Box
Thanks for buying a BISSELL® carpet cleaner! We love to clean and we’re excited to share one of our innovative products with you. We want your carpet cleaner to work like new for the years to come, so this guide has tips on how to use, maintain and, if there’s a problem, troubleshoot. -
Page 4: Product View
• If cleaning an entire room, consider moving your furniture to another area. • Use a dry vacuum cleaner over area before using your carpet cleaner. • Pretreat stains with BISSELL® Pretreat to improve performance on coffee stains and ground-in dirt. - Page 5 Your tray is assembled Rinse Cup can also be of the Rinse & Storage Tray. and ready for use. stored on the Rinse & (There are 2 hooks on each Storage Tray. side of Part A that hook under Part B.) www.BISSELL.com...
-
Page 6: Cleaning Formula
» To reduce the risk of fi re and electric shock when cleaning a hard fl oor, the BISSELL Hard Floor Tool must be used and is only to be used with BISSELL Hard Floor Solutions formula intended for use with this appliance. - Page 7 NOTE: Fill with hot (140°F/60°C MAX) tap water and add the appropriate BISSELL formula. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR TANK IN MICROWAVE. Do not substitute BISSELL Formula cleaning formula with other household cleaning products.
- Page 8 BISSELL® formula. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR TANK IN MICROWAVE. • When using BISSELL Antibacterial formula: Only fi ll your Clean Water Tank with the recommended amount of water and formula to achieve antibacterial benefi ts.
- Page 9 • It is common to refill the Clean Water Tank and empty the Dirty Water Tank multiple times throughout your cleaning process. Room size and the speed at which you clean are both factors that affect how often the tank may need to be refilled and/or emptied. www.BISSELL.com...
- Page 10 The window of the the button will be scrubbing and suction. button will be red and show green and show an “I” an “O” symbol when it is off. symbol when it is on. www.BISSELL.com...
- Page 11 WET MODE NOTE: Start from the area farthest away. Hold the trigger down, and pull the tool toward you. Keep the tool in contact with the surface as you pull. You will see extraction through the Nozzle. www.BISSELL.com...
-
Page 12: Emptying The Dirty Water Tank
Then tilt the The Float Stack is what by wiping off any tank toward the machine prevents your dirty tank remaining dirt or and push the top in until from overflowing. debris. it clicks into place. www.BISSELL.com... -
Page 13: Storing Your Machine
Finally, release the trigger and extract the water. return the tank to the machine. See page 15 to clean the Dirty Water Tank from the Twist cap back on tightly. water that was just extracted. www.BISSELL.com... - Page 14 Door to extract the water from the tray. tray. If the tray is over-filled, the water could splash out of the tray when the After using the tray, clean any water that machine is turned ON. may have escaped the tray while in use. www.BISSELL.com...
- Page 15 Brush Rolls. near the floor and rotate to snap back into place. NOTICE: To reduce the risk of a leaking condition, do not store machine where freezing may occur. Damage to internal components may result. www.BISSELL.com...
- Page 16 NOTE: To replace Brush Rolls, remove them from the metal posts and replace. Make sure the metal post goes completely through the end of the Brush Roll. The bristles should be aligned in a ‘V’ pattern as pictured. www.BISSELL.com...
- Page 17 NOTE: See Step 6 on page 15 for how to put the Brush Roll Cover and Nozzle back in place. NOTE: Other maintenance or service not included in this user guide should be performed by an authorized service representative. www.BISSELL.com...
-
Page 18: Troubleshooting
2. With the cap twisted ON tightly, hold your tank at an angle, over a Water may be caught in space Leaking Tank sink or drain, so any extra water can pour out of the space. between the tank and the tank’s 3. Wipe the tank dry with a cloth. handle. www.BISSELL.com... -
Page 19: Warranty
Care by E-mail or telephone as described it was sold. below. BISSELL is not liable for incidental or It may be necessary to obtain some of your consequential damages of any nature personal information, such as a mailing associated with the use of this product. -
Page 20: Parts And Supplies
Visit BISSELL.com/registration! Parts & Supplies For Parts and Supplies, go to www.BISSELL.com and enter your model number in the search field. We’re Waggin’ Our Tails! BISSELL® proudly supports BISSELL Pet Foundation® and its mission to help save homeless pets. When you buy a BISSELL product, you help save pets, too.