Bissell REVOLUTION PET PRO 2283 User Manual page 14

Rinsing the Brush Roll & Nozzles
1
Set your machine on the Rinse & Storage
Tray and OPEN the Accessory Hose Door.
Make sure the machine is not reclined. The
machine should be in its upright position
to prevent water from splashing.
3
Fill the tray with water using the Water
Cup. ONLY ADD WATER when using the
tray. If the tray is over-filled, the water
could splash out of the tray when the
machine is turned ON.
14
www.BISSELL.com
2
Fill the Water Rinse Cup with fresh tap
water to the fill line on the cup.
4
Turn the machine ON. This will begin to
wash and rinse the Brush Rolls. After
6-8 seconds CLOSE the Accessory Hose
Door to extract the water from the tray.
After using the tray, clean any water that
may have escaped the tray while in use.