Bissell REVOLUTION PET PRO 2283 User Manual page 7

Filling Your Clean Water Tank
1
The Clean Water Tank is
at the top of the machine.
3
FORMULA FILLING
INSTRUCTIONS
BISSELL® Formulas
BISSELL Boost
Formula Enhancers
(Optional)
NOTE: Fill with hot (140°F/60°C MAX) tap water and add the appropriate
BISSELL formula. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR TANK IN
MICROWAVE. Do not substitute BISSELL Formula cleaning formula with other household
cleaning products.
Clean Water Tank
(1 Gallon)
Dirty Water Tank
With Formula:
Unscrew the cap from
the tank. Add hot tap
water to the water fill
line. Next, reference
the chart below for
formula amounts to
add to the tank. Twist
cap back into place.
DEEP CLEAN &
MAX CLEAN MODE
• Fill water to the Water Fill Line
next to the DEEP/MAX CLEAN
mode on the Clean Water Tank.
• Fill tank with 2.5 oz. of formula.
• For extra cleaning power, fi ll the
formula until it reaches the
"Maximum Formula" line (5 oz).
Note: When using BISSELL PRO
MAX Clean + Protect Formula,
only add 2.5 oz. to the tank.
Add 2 oz. of BISSELL Boost formula
to the tank for enhanced cleaning
results.
2
Lift the tank straight up to remove from
the machine.
4
At the bottom of the Upper Handle, align
the tank with the grooves and slide the
tank into place.
• Fill water to the Water
Fill Line next to the
EXPRESS CLEAN mode
on the Clean Tank.
• Fill tank with 1.25 oz. of
formula.
Add 1 oz. of BISSELL Boost
formula to the tank for
enhanced cleaning results.
EXPRESS CLEAN
MODE
www.BISSELL.com
7