Connecting Cables - Eizo Radiforce GS521-BL Manual

Connecting Cables

Note
• Check that the monitor and the PC are powered off.
When replacing the current monitor with a GS521 monitor, be sure to change the PC settings
•
for resolution and vertical frequency to those which are available for the GS521 monitor referring to
the resolution table (back of cover page) before connecting the PC.
• The monitor may need to be set in some operating environments (such as for certain graphics boards,
input signals, installation orientations, etc.). For information about the monitor settings, see the User's
Manual on the CD-ROM.
Tips
• When connecting two PCs to the monitor, refer to the User' s Manual on the CD-ROM.
1
Turn the monitor screen 90° in counter-clockwise direction.
The landscape position is the default monitor orientation. Turn the monitor screen ninety degrees
counter-clockwise to portrait position before installing it.
2
Connect the monitor to the PC with a signal cable that matches the connectors.
After connecting the cable connectors, tighten the screws of the connectors to secure the coupling.
3
Connect the USB cable when using RadiCS LE or ScreenManager Pro for Medical.
Connecting to the Monitor
4
Plug the power cord into a power outlet and the power connector on the monitor.
5
Press to turn on the monitor.
The monitor's power indicator lights up green.
6
Turn on the PC.
The screen image appears.
If an image does not appear, refer to "No-Picture Problem" (page.6) for additional advice.
Note
• Turn off the monitor and PC after using them.
• For the maximum power saving, it is recommended that the Power button be turned off. Turning off
the main power switch completely shuts off power supply to the monitor.
Digital PP200
connection
or
Digital
DD200-DL
connection
Connecting to a Computer
3