Cleaning - Eizo SCD 19102 Instructions For Use Manual

Cleaning

8.1 Cleaning
8 Cleaning
8.1 Cleaning
NOTICE
Device maintenance, cleaning and disinfecting
• The front panel is extremely sensitive to mechanical damage. Avoid all scratches,
knocks etc.
The SCD 19102 CP version with protective glass are much less sensitive in this regard.
• SCD 19102 version, without protective glass: Remove water drops immediately; ex-
tended contact with water discolors the surface.
• Clean the front panel when dirty using a microfiber cloth and, if necessary, a cleaning
agent. Only clean housing parts using the recommended cleaning agents.
• The entire monitor may only be disinfected using the tested disinfecting agents.
NOTICE
Remove all residual cleaning agents immediately
• Some cleaning agents leave residue (streaks) on the surface that can easily be re-
moved by wiping with a damp cloth.
• Remove residues of alcohol, "Cidex", "Taski DS 5001" and "Surfanios Fraicheur Citron"
from the surface immediately. Residue of these cleaning agents on the surface often
causes permanent streaks.
Recommended cleaning agents and disinfectants
Agent class
Alcohol
Aldehyde
Chlorine derivatives
64
Tested cleaning agents and disinfectants
• Ethyl alcohol (96%)
• Isopropyl alcohol (70%)
• 0.5% chlorhexidine in isopropyl alcohol (70%)
• Melsitt
• Cidex
• Cidex (2.4% glutaraldehyde solution)
• Terralin
• Sodium hypochlorite (10%)
Further examples
• Hospiset cloth
• Mikrozid liquid
• Aldasan 2000
• Kohsolin
• Gigasept FF
Quartamon Med
SCD 19102
Instructions for Use, 06/2022