Table of Contents
Advertisement
Chapter Operation
-1 Input Signal Switching
This function allows you to switch the input signal according to the device that
you want to display.
(1) Press
,
or
Each time you press the button, the input signal switches as below.
-
: PC1 → PC2
-
: VIDEO1 → VIDEO2
-
: HDMI1 → HDMI2
■
USB Selection Setting [USB Selection]
When connecting the USB devices to the downstream port of the monitor, you
can specify the PC on which the USB devices work.
Settings
Auto
PC1
PC2
(1) Choose [Monitor Settings] in the Setting menu and press
(2) Choose [USB Selection] in the [Monitor Settings] menu and press
The [USB Selection] setting menu appears.
(3) Select "Auto", "PC1" or "PC2" with t or u , and then press
The setting is completed.
- Volume Adjustment
This function allows you to adjust volume of the headphones up or down.
●
To turn the volume up/down
Adjustable range: 0 to 50
(1) Press
or
on the remote control.
●
To mute the sound temporarily
(1) Press
on the remote control.
Mute sound temporarily.
By pressing the button again or pressing
1
Chapter 2 Operation
on the remote control.
Using status
The PC on which the USB devices work switches
automatically according to input signal switching
(between PC 1 and PC 2).
The USB devices work on the PC connected to
"PC1" input.
The USB devices work on the PC connected to
"PC2" input.
, the sound comes back.
NOTE
NOTE
• Operation with the buttons on the
• Operation with the buttons on the
monitor
monitor
- Press
- Press
menu appears, and then switch the
menu appears, and then switch the
input signal with t or u.
input signal with t or u.
Attention
Attention
• "Auto" functions only for the PC
• "Auto" functions only for the PC
connected to PC input.
connected to PC input.
• To use the USB device on the PC
• To use the USB device on the PC
connected to HDMI input, connect
connected to HDMI input, connect
the PC to the upstream port ("PC 1"
the PC to the upstream port ("PC 1"
or "PC 2") of the monitor with the
or "PC 2") of the monitor with the
USB cable, and then select the port to
USB cable, and then select the port to
which the USB cable is connected in
which the USB cable is connected in
[USB Selection].
[USB Selection].
• Please note the following when
• Please note the following when
changing the setting.
changing the setting.
- When connecting a memory device
- When connecting a memory device
.
such as a USB memory to the
such as a USB memory to the
.
monitor, the data may be lost and
monitor, the data may be lost and
damaged. Be sure to change the
damaged. Be sure to change the
.
USB setting after removing the
USB setting after removing the
memory device.
memory device.
NOTE
NOTE
• Operation with the buttons on the
• Operation with the buttons on the
monitor
monitor
- Press
- Press
appears, and then adjust the volume
appears, and then adjust the volume
with t or u.
with t or u.
NOTE
NOTE
• The mute setting can also be released
• The mute setting can also be released
by pressing u on the monitor.
by pressing u on the monitor.
until the input selection
until the input selection
until the volume menu
until the volume menu
Advertisement
Table of Contents
