General Safety Information; Dimensions - Delta BREEZ VCA523 Series Manual

GENERAL SAFETY INFORMATION

READ AND SAVE THESE INSTRUCTIONS
GENERAL SAFETY INFORMATION
1. Make sure that the electric service supply voltage is
AC 120V, 60Hz.
2. To avoid possible electric shock, turn off the
electricity at the main fuse box or circuit panel before
you begin the fan installation or before servicing the
fan or installing accessories.
3. Use this unit only in the manner intended by the
manufacturer. If you have questions, contact the
manufacturer.
4. Make sure all electrical connections comply with local
codes or ordinances as well as the National Electrical
Code. If you are unfamiliar with electric wiring, please
use a qualified and licensed electrician.
5. Make sure you have a location selected for your fan
which allows clear space for the blades to rotate, and
at least seven (7) feet of clearance between the floor
and the fan blade tips.
6. Protect the power cord from sharp edges, oil, grease,
hot surfaces, chemicals or other objects.
7. Do not kink the power cord.
8. Before servicing or cleaning unit, switch power off at
service panel and lock the service disconnecting
means to prevent power from being switched on
accidentally. When the service disconnecting means
cannot be locked, securely fasten a prominent
warming device, such as a tag, to the service panel.
9. Do not use water or detergents when cleaning the fan
or fan blades. A dry dust cloth or lightly dampened
cloth will be suitable for most cleaning.

DIMENSIONS

WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS, OBSERVE THE FOLLOWING:
1. The outlet box and ceiling support joist used must be
securely mounted, and capable of supporting at least 35
pounds. To reduce the risk of fire, electric shock, or
personal injury, Use only UL-listed outlet boxes marked
"Acceptable for Fan Support of 35 lbs.
2. To reduce the risk of personal injury use only approved
hanging brackets and screws supplied with the outlet box
for mounting to the outlet box.
3. After installation is complete, check that all connections
are absolutely secure.
4. To reduce the risk of personal injury, do not bend the
blade brackets when installing the brackets, balancing the
blades, or cleaning the fan. Do not insert foreign objects in
between rotating fan blades.
5. When cutting or drilling into the wall or ceiling, do not
damage electrical wiring and other hidden utilities.
6. Do not attempt to control the operation of the fan (or an
optional light kit) from any control that is not approved by
Delta for use with its fans. The use of any unapproved
control voids the fan's warranty.
3