Electrical Connections; Completing The Installation - Delta BREEZ VCA523 Series Manual

ELECTRICAL CONNECTIONS

REMEMBER – Power should remain off!
1. Connect the fan supply (black) wire to the black
household wire. (Fig. 9)
2. Connect the fan neutral (white) wire to the white
household wire. (Fig. 9)
3. Connect the fan ground wire (green) to the household
ground wire.(Fig. 9)
4. After connecting the wires, spread them apart so that
the green and white wires are on one side of the outlet
box and the black wires are on the other side. Turn the
connecting nuts upward and push the wiring into the
outlet box.(Fig. 10)

COMPLETING THE INSTALLATION

1. Make sure the wiring is safely inside the outlet box as
instructed in Electrical Connections.
2. To install the ceiling canopy, loosen the 2 screws from
the hanger bracket without fully removing them. Slide
the ceiling canopy up to the hanger bracket through the
large hole side and rotate the ceiling canopy so the 2
screws move into the small opening of the key-slot.
Secure by tightening the two set screws. (Fig.11)
3. Align the arrowhead of the Canopy cover with the
arrowhead of the Canopy and install it. (Fig.12)
Note: Do not attempt to test the connections or the
fan by turning the power on without installing the
blades and light kit and pairing the remote.
9
10
11
12
6