Advertisement
Available languages
Available languages
PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN THIS BOOKLET FOR REFERENCE
INSTALLATION AND OPERATING INSTRUCTIONS
GENERAL SAFETY INFORMATION
Please use this product according to the installation and
1.
operating instructions. If you have any problem or question,
please contact the manufacturer.
Disconnect device shall be incorporated in the building
2.
installation wiring.
Switch power off and disconnect power source before
3.
installation or maintenance to prevent from power been
switched on accidentally. If cannot discount power source,
securely fasten a prominent warning device, such as a
caution label, to the power switch
Installation work and electrical wiring must be done by
4.
qualified person(s) in accordance with all applicable codes
and standards, including fire-rated construction.
Must prevent the back-flow of gasses into the room from the
5.
open-flue of gas.
When open the package or install the device, please be
6.
careful to avoid damage product and accessories.
Please install circuit breaker if this product is to be installed
7.
in the bathroom or place risk to have water come in.
NEVER place a switch where it can be reached from a tub
8.
or shower.
Do not install this fan in the place where the temperature is
9.
To reduce the risk of injury to persons, install this product at
10.
least 2.3m above the floor
Do not install this product in the place near flame.
11.
This product is for general ventilating use only. Do not use
12.
to exhaust hazardous or explosive materials and vapors.
Do not install this product in the place where ducts are
13.
configured as shown in Fig. 1.
Do not install this product in the place with steam.
14.
Install this product securely to prevent from abnormal sound
15.
happen.
An appropriate air intake is required.
16.
Provide inspection and future maintenance access at a
17.
location that will not interfere with installation work.
Do not install this product near the cooking equipment.
18.
(Fig. 2)
Fig. 1
Ventilation Fan Model
INFORMATION
Model
VFB17AXTH
1.
Fan Body Installation
Make wooden frame by using 30mm square of wood and
1-1.
install to the ceiling joist.
Install duct connector with wooden frame by using tapping
1-2.
screws.
Install the fan body into the wooden frame and assemble
1-3.
with the duct connector. Secure fan body and wooden
frame by using tapping screw.
VFB17AXTH
Fig. 2
Installation Size (mm.)
175
175
Advertisement
