Table of Contents
Advertisement
ID.4 2021 ➤
Maintenance - Edition 12.2020
Note
To prevent brake fluid from flowing out of the reservoir, the max.
marking -1- must not be exceeded.
Brake fluid level during inspection
Note
The fluid level must always be judged in conjunction with
♦
lining/pad wear.
When vehicle is in use, fluid level tends to drop slightly due
♦
to lining/pad wear and automatic adjustment.
Recommended brake fluid level "before" brake pads are at wear
limit
•
At MIN marking or just above -2-
"replenishing is NOT required".
Recommended brake fluid level, brake pads new or well within
wear limit:
•
Between MIN and MAX markings
NOTICE
If the fluid level is below min. marking -2-, the brake system
must be checked for leaks before fluid is topped up, "Repair
measure".
4.12
Front brake discs and rear drum brake
pads: checking thickness of pads and
condition of discs
Front disc brake pads: checking thickness
Rear drum brake pads: Checking thickness
Brake discs: checking condition
Special tools and workshop equipment required
♦ Torque wrench
36
4. Descriptions of work
⇒ page 37
⇒ page 38
⇒ page 39
Advertisement
Table of Contents
