ID.4 2021 ➤
Maintenance - Edition 12.2020
– Use selector buttons on headlight adjusting unit -VAS
621 001- to select »Dipped beam« menu.
– With the dipped beam switched on, the lowest part of the
horizontal light-dark border must be aligned with the dividing
line -1- of the test area.
– The breaking point -2- between the horizontal part of the
light-dark border on the left and the slope on the right should
be on the vertical line passing through the centre mark.
Note
To simplify the determination of the breaking point -2-, cover
♦
and uncover left (from driver perspective) half of the head‐
light a few times. Then check dipped beam again.
After correct adjustment of dipped beams, the centre point of
♦
the main beam must lie on the centre mark -3-.
4.31.3
Check headlight adjustment using
headlight adjusting unit -VAS 5046 A-
or headlight adjusting unit -VAS 5047
A-
Special tools and workshop equipment required
♦ Headlight adjustment unit -VAS 5046 A-
♦ or
♦ Headlight adjustment unit -VAS 5047 A-
Inclination value for ECE LED headlights
Inclination
1.0%
60
4. Descriptions of work