ROBOTIQ AX10 Original Instructions Manual page 6

6
Script "Get Current Box Type" added in Software section.
l
Box sensor(s) subsection modified in Installation section.
l
2022/11/22
Cable management installation improved (Installation section).
l
Link for action associated to red slow blink light modified (Operation section).
l
Link for action associated to yellow solid light modified (Operation section).
l
Images of Configurable Outputs modified (Installation section).
l
2022/10/03
Linear Axis Move images modified (Software section).
l
Maximum value for Elbow joint limit changed from 0° to 3°. Minimum and maximum values for Wrist 3 joint limits changed from -
l
270° to -273° and 270° to 273° (Installation section).
Cable management material and installation modified (Installation section).
l
Cable management spare parts removed (Spare Parts, Kits and Accessories section).
l
2022/04/25
Added warning note for Moving and Positioning the Solution (Installation section).
l
Added ''Add virtual planes around pallet(s)'' option (Installation and Software sections).
l
Added an ''Avoid collision with conveyor'' option in the Palletizer node and the different configurations (Software section).
l
Added scripts ''Get Pallet State'' and ''Set Palletizer State'' in Software section.
l
2022/03/28
Added Robot Limits section
l
2022/02/03
Added Physical Clearance and Reachable Area of the Robot section
l
Updated Safety Connections section
l
2022/01/04
Added script functions
l
Updated Installation on Universal Robots e-Series section
l
The palletizer model is now named AX Series
l
2021/10/07
Updated Center of mass, tool center point (TCP) table
l
2021/09/22
Updated Safety Connections Appendix
l
Pink wire is now orange
l
AX10 Palletizing Solution