Table of Contents
Advertisement
en Rinse aid system
Press
.
1.
Press and hold
2.
Turn the programme selector until
3.
the display shows H:04.
Release the button.
4.
Turn the programme selector until
5.
the display shows H:00.
Press
to save the setting.
6.
The water softening system is
a
switched off and the salt refill indic-
ator is deactivated.
Overview of consumption values with regeneration the water softening
system
Here you can find an overview of the maximum additional running time and
consumption values during regeneration of the water softening system.
You can find the column applicable to your model in the quick reference guide
according to its water consumption in the Eco 50° programme.
Water con-
sumption in
litres (de-
pending on
model)
8
9
The consumption values specified
are laboratory measurements determ-
ined in accordance with the currently
applicable standard and using the
Eco 50° programme and the factory
value of the water hardness is set to
16 - 20°E.
24
.
Regeneration
of the water
softening
system after
x rinse cycles
5
4
11.5 Regeneration of the wa-
In order to obtain fault-free function of
the water softening system, the appli-
ance performs reheating of the water
softening system at regular intervals.
Regeneration of the water softening
system takes place before the end of
the main rinse cycle in all pro-
grammes. It will increase the run time
and consumption values, e.g. water
and electricity.
Additional
running time
in minutes
4
4
Rinse aid system
12 Rinse aid system
You can use the rinse aid system
Rinse aid system
and rinse aid to get tableware and
glasses rinsed perfectly without
marks.
12.1 Rinse aid
For optimum drying results, use rinse
aid.
Only use rinse aid for domestic dish-
washers.
ter softening system
Additional
water con-
sumption in
litres
2.5
2.5
Additional
power con-
sumption in
kWh
0.03
0.03
Advertisement
Table of Contents
