Janome Quilt Maker Pro 16 User Manual page 44

User Manual
1. A昀琀 er touching the Tools and Update bu琀琀 ons and with the
red arrow fl ashing, insert the USB drive into the USB port on
the right side of the display (front or rear). Note: The other
display must be disconnected from the machine.
2. Touch the machine update bu琀琀 on on the screen to update
the machine's so昀琀 ware.
 IMPORTANT: Do not remove the USB drive from the
port un琀椀 l the machine update bu琀琀 on turns from blue
back to gray. This may take 1.5 to 2.5 minutes. If the USB
drive is removed prematurely the program will not fully
update. This will corrupt the machine so昀琀 ware making it
inoperable. The machine will then need to be returned
to Janome for repair.
3. The machine bu琀琀 on will turn blue while the machine
so昀琀 ware is upda琀椀 ng.
4. The Quilt Maker Pro 16 will search for the machine update fi le on the USB drive. When the update is
complete, the display screen bu琀琀 on will once again turn gray.
To update the front display's so昀琀 ware
1. A昀琀 er touching the Tools and Update bu琀琀 ons and with the red arrow fl ashing, insert the USB drive into
the USB port on the right side of the display (front).
2. Touch the display update bu琀琀 on on the screen to update the display so昀琀 ware.
3. The display screen will go blank un琀椀 l the so昀琀 ware is updated. Do not remove
the USB drive un琀椀 l the display screen returns.
 IMPORTANT: Do not remove the USB drive from the port un琀椀 l the machine display screen is once
again ac琀椀 vely displayed. This may take 1.5 to 2.5 minutes. If the USB drive is removed prematurely
the program will not fully update. This will corrupt the display so昀琀 ware.
 If the display so昀琀 ware update is interrupted and corrupted, it is possible to reprogram the display
by pu琀� ng it into the Boot Loader Programming Mode. This is done by holding down fi rmly the
needle up/down bu琀琀 on and the - (minus) simultaneously while powering on the machine. Then
insert the USB drvie into the right USB port of the display and wait un琀椀 l the display screen returns.
Note: This cannot be done for the machine so昀琀 ware if it is interrupted.
www.janome.com
QUILT MAKER PRO 16
49