Janome Quilt Maker Pro 16 User Manual page 33

User Manual
To use Precision s琀椀 tch regula琀椀 on
• Touch the Regulated bu琀琀 on and then press the Precision bu琀琀 on.
Press to select
Precision mode.
A昀琀 er you press the Start/Stop bu琀琀 on on the handlebars, you must begin moving the machine for it to
begin quil琀椀 ng according to the s琀椀 tches-per-inch se琀� ng. The circle above the Needle-stop bu琀琀 on turns
green when you press the Start/Stop bu琀琀 on on the handles, indica琀椀 ng that the needle is in mo琀椀 on mode.
When you stop quil琀椀 ng by pressing the Start/Stop bu琀琀 on on the handlebars again, the circle turns red,
indica琀椀 ng that the needle is in not mo琀椀 on mode.
When you begin moving the machine, s琀椀 tching begins. When you stop moving the machine, s琀椀 tching
stops but just un琀椀 l you move it again.
 NOTE: When using Precision s琀椀 tch regula琀椀 on, if you stop moving the machine but do not press the
Stop/Stop bu琀琀 on, a昀琀 er two minutes it will 琀椀 me out and a message box appears to let you know you
will need to press the Start/Stop bu琀琀 on to resume quil琀椀 ng.
 CAUTION: Always make sure the power is off when changing the needle, replacing the bobbin, or
placing your hands near the needle to avoid unwanted s琀椀 tching in your quilt or in your fi ngers.
Machine Quilting Tip: When to use Precision stitch regulation
Precision s琀椀 tch regula琀椀 on mode is useful for ruler work. S琀椀 tch along the length of the ruler
for the span of your hand and stop moving the machine, but do not press the Stop bu琀琀 on.
When you stop moving the machine, the needle pauses. Move the ruler and then begin
moving the machine to con琀椀 nue quil琀椀 ng. Precision s琀椀 tch regula琀椀 on helps you to avoid
misplaced and uneven s琀椀 tches.
38
QUILT MAKER PRO 16
Press to select S琀椀 tch
Regula琀椀 on.
Press the plus (+) or
minus (—) to change
the s琀椀 tches-per-inch
se琀� ng.
www.janome.com