Toro Greensmaster e1021 Operator's Manual page 24

Figure 24
•
Mow at a normal walking pace. Fast speeds saves
little time and results in an inferior mowing job.
•
To assist in maintaining a straight line across
the green and to keep the machine an equal
distance from the edge of the previous cut, use the
alignment stripes on the basket
Figure 25
1. Alignment stripes
Operating the Machine in Low
Light Conditions
Use the LED Light Kit when you operate the machine
in low light conditions. Contact your authorized Toro
distributor for this kit.
Important:
this machine; they may damage the battery pack
or electrical system.
Operating the Controls while
Mowing
g271799
(Figure 25).
g341513
24
Do not use other light systems with
1. Start the machine, set the speed control to a
reduced speed, push down on the handle to
raise the cutting unit, and engage the traction
drive to transport the machine onto the collar or
approach of the green.
2. Stop the machine on the collar or approach.
3. Use the speed control to increase the machine
speed, engage the cutting unit, engage the
traction drive to move the machine onto the
green, lower the cutting unit to the ground, and
begin mowing.