Danfoss Termix VX Operating Manual page 13

Operating Guide Termix VX with complete insulation
6.1.4 Electronic control
Substations with electronic control must be set in accordance with
manufacturer´s instructions.
Where the room temperature is controlled by radiator thermostats,
it is recommended that thermostats be set for minimum
temperature in each room.
6.1.5 Outside temperature sensor
Outdoor sensors should be mounted so as to avoid exposure to
direct sunlight. They should not be placed close to doors, windows
or ventilation outlets.
6.1.6 Circulator pump UPM3
UPM3 Pumps can be controlled in constant pressure, proportional
pressure or constant speed mode defined by the means of a smart
user interface.
The variable speed modulating modes allow the pump to match its
performance to the system requirements, helping to reduce noise
when thermostatic valves are closing down.
Energy labelling class A
AQ221686472754en–010401 / LUK4030601
© Danfoss | 2022.11 | 13