About I.link - Sony Handycam DCR-HC20 Operation Manual

About i.LINK
The DV Interface on this unit is an i.LINK-
compliant DV Interface. This section describes
the i.LINK standard and its features.
What is i.LINK?
i.LINK is a digital serial interface for
transl_rring digital video, digital audio, and
other data to other i.LINK-compatible device.
You can also control other device using the
i.LINK.
i.LINK*compatible device can be connected
using an i.LINK cable. Possible applications are
operations and data transactions with various
digital AV devices.
When 2 or more i.LiNK-compatible devices are
connected to this unit in a daisy chain,
operations and data transactions are possible
with not only the device that this unit is
connected to but also with other devices via the
directly connected device.
Note, however, that the method of operation
sometimes varies according to the
characteristics and specifications of the device
to be connected. Also, operations and data
transactions may not be possible on some
connected devices.
O Note
• Normally, only one device cm_ be connected to this
unit with d_e i.LINK cable. When connecting this
unit to i.LlNK-compatible device having 2 or more
DV Interfaces, refer to the operating in_ructions of
the device to be connected.
"8" Tips
• i.LINK is a more tSmiliar term for the IEEE 1394
data transport bus proposed by Sony, and is a
trademark approved by mm_y corporations.
• IEEE 1394 is an internalional slandard standardized
by the Institule of Electrical and Electronics
Engineers.
About i.LINK Baud rate
i.LINK's maximum baud rate varies according
to the device. There are 3 types.
SI00 (approx. 100Mbps*)
$200 (approx. 200Mbps)
$400 (approx. 400Mbps)
The baud rate is listed under "Specifications" in
the operating instructions of each piece of
device. It is also indicated near the i.LINK
interface on some devices.
The maximum baud rate lbr device that does not
have any indication (such as this unit) is
"SI00."
The baud rate may differ from the indicated
value when the unit is connected to device with
a different maximum baud rate.
* What is Mbps?
Mhps stands tbr "megabits per second," or the
amount of data that can be sent or received in I
second. For example, a baud rate of 100 Mbps means
thai 100 megabits of dam can be sent in I second.
To use i.LINK functions on this unit
}'or details on how to dub when this unit is
connected to other video device having a DV
Interface, see page 62, 63.
This unit can also be connected to other i.LINK
(DV interface) compatible device made by
Sony (e.g. a VAIO series personal computer) as
well as to video device.
Before connecting this unit to your computer,
make sure that application software supported
by this unit is already installed on your
computer.
Some i.LINK compatible video devices such as
Digital Televisions, DVD recorders/players,
and MICROMV recorders/players are not
compatible with DV device. Before connecting
to other device, be sure to confirm whether the
device is compatible with DV device or not.
For details on precautions and compatible
application software, refer also to the operating
instructions lbr the device to be connected.
Aboutthe required i.LINK cable
Use the Sony i.LINK 4_pin4o-4_pin cable
(during DV dubbing).
i.LINK and [L are trademarks ol'Sony
Corporation.
Additional Information 85
/
&
o