Usingthe
(VCR
SET)menu- HiFi SOUND/AUDiO
MIX
You can select items lisled below on the VCR
SET menu. To select these items, see
"Changing
fl_e menu settings" (p. 43).
The default settings are marked with t> The
indicators
in parenlheses
appear when fl_e
setting is selected. The seltings you can adjust
vary depending
on the power mode of your
camcorder,
fbe screen shows the items you can
operate at the moment. Unavailable
items will
be grayed out.
You
can select
how
to play
back
audio
recorded
on a tape in stereo
mode.
_>STEREO
Select to play back a stereo t_pe or dual sound track tape with m_in
and sub sound.
1
Select to play back a stereo tape with the ]ef_ channel
sound or a dual
sound track tape with main sound.
2
Select to play back a slereo tape with the right channel
sound or a dual
sound track tape with sub sound.
Notes
• YOU can play back a dual sound track cassette
on this camcorder.
However,
you cannot
record a dual sound Pack on this camcorder.
• The setting returns
to [STEREO]
when you disconnect
the power source
from your
camcorder
fbr more fllan 5 minutes.
You can adjust the audio balance between the originally
recorded
sound ([STI])
and sound added afterwards
([ST2]) on fl_e tape (p. 70).
Notes
• You cannot adjusl sound recorded
in 16 bit audio mode.
• Only the originally
recorded
sound will be heard when you disconnect
the power source
from your camcorder
tBr more than 5 minutes.
50
Customizing
Your Camcorder