Advertisement
Hob2Hood*
* It is an automatic function which
connects the hob with a hood. Both the
hob and the hood have an infrared signal
communicator. Speed of the fan is defined
automatically on basis of mode setting
and temperature of the hottest cookware
on the hob. You can also operate the fan
using the hob manually. The Hob to Hood
function can be activated from the control
panel of the hob.
*For applicable models only.
For more information how to use the
function refer to the hob user manual.
Hints and Tips for Hob2Hood function
When you operate the hob with
Hob2Hood function:
•
Protect the hood panel from direct
sunlight.
•
Do not spot halogen light on the hood
panel.
•
Do not cover the hob panel.
•
Do not interrupt the signal between
the hob and the hood (for example
with a hand or a cookware handle).
It may happen that other remote
controlled appliances may block the
signal. To avoid it do not operate the
remote of the appliance and the hob at
the same time.
To find the full range of rangehoods
which work with this function refer to
our consumer website. The rangehoods
that work with this function must have
the symbol
14
or
Activate and deactivate Delay Off
When activated, the
flashing and the hood will continue to run
for the next five minutes before shutting
down automatically.
To deactivate the Delay Off function, press
on the flashing
icon or press the ON/OFF
Delay Off function will be turned off.
Activate PowerBoost
When you press the symbol
Maximum Motor Speed starts to operate
for 8 minutes. After that time, the
appliance returns to its previous speed
settings.
When the function is turned on,
additional touch on the symbol
not have any effects.
icon will start
or any of the Fan Speed
and the
, the
does
Advertisement
