How To Use: Tank Emptying; How To Remove And Install: Door - AEG BFS8500T User Manual

Step 2 Fill the water drawer with water to the maximum level until the signal sounds or the
display shows the message.
Step 3 Select: Menu / Cleaning / Rinsing.
Duration: around 30 min
Step 4 Turn on the function and follow the instruction on the display.
Step 5 When the function ends, remove the deep pan.
When this function works, the lamp is off.

11.8 How to use: Tank emptying

Use it after cooking with steam heating function to remove the residual water from the water
drawer.
Turn off the oven and wait until it is cold.
Step 1 Place the deep pan on the first shelf position.
Step 2 Select: Menu / Cleaning / Tank emptying.
Duration: 6 min
Step 3 Turn on the function and follow the instruction on the display.
Step 4 When the function ends, remove the deep pan.
When this function works, the lamp is off.

11.9 How to remove and install: Door

You can remove the door and the internal glass panels to clean it. The number of glass panels
is different for different models.
WARNING!
The door is heavy.
CAUTION!
Carefully handle the glass, especially around the edges of the front panel. The
glass can break.
CARE AND CLEANING
Before you start:
Remove all accessories.
79/272